Kolkata Pipe Fittings is a Superlative Mild Steel Tee Manufacturers, Suppliers, Dealers, Stockists and Traders in Kuwait. A Mild Steel Tee is a pipe fitting that is used to join three portions of pipe at right angles to one another creating a T-shape. Mild steel tees are manufactured using the low carbon steel that is very strong, durable and cost effective. It gives flow systems in piping the ability to branch and therefore the fluid or gas can be dispensed in various directions. The applications mainly include low to medium-pressure in water supply, HVAC, chemical, and construction.
What is Mild Steel Tee?
Mild Steel Tee Suppliers in Kuwait is a type of pipe fitting which is in a shape of the letter T and serves to join 3 sections of a pipe in a piping system. It enables you to branch or divide the flow of liquids or gases at a 90 degree angle of the main pipe. Mild Steel Tee Bar tees consist of low carbon steel which is strong, durable and economical.
Types of Mild Steel Tee
Being the Brilliant Mild Steel Tee Manufacturers in Kuwait, we are providing the best quality of Mild Steel Flange such as:
-
Equal Tee: Equal Tee is a three hole pipe fitting with three openings and equal diameter that are intended to connect three pipes at right angles. Mild Steel Tee Suppliers in Kuwait It enables the same fluid to flow uniformly without capacity loss because all the openings are the same and thus in common slang it is referred to as a straight tee. Mild Steel Pipe Tee It is usually applied in water supply, oil and gas pipes where branches pipes must be of equal size as the main one to achieve harmonious and efficient distribution.
-
Reducing Tee: Reducing Tee a Reducing Tee is a pipe fitting which unites three pipes together, one being smaller than the main pipe. It is applied in situations where a bigger pipe is required to divide into a smaller one so that the flow and pressure could be better controlled. This kind of tee is applicable in fluid and gas distribution systems where varying sizes of pipes are required to address the issue of direction of flow or pressure.
-
Stub End Tee: The Stub End Tee is similar to a flanged connection and an end of the tee is fitted with a flange. Mild Steel Tee enables the branch pipe to be easily removed or remodeled without affecting the main pipeline. MS Tee Buttwelded It is occasionally applied in the high pressure systems like oil and gas, power stations and ship piping.
-
Lateral Tee: A Lateral Tee is used in connecting a lateral branch pipe to the main or primary pipeline by a different angle than 90 degrees, usually 30 degrees, 45 degrees, or 60 degrees. Mild Steel T Section It is applied to modify the direction of flow smoothly rather than having a sharp direction and thus it can be applicable in industries such as mining, the processing of chemicals and other industrial usage where flow direction is critical.
Technical Specifications Mild Steel Tee
We've added below a specialized table of Mild Steel Tee Manufacturers in Kuwait that provides further technical specification information:
| Parameter |
Specification |
| Material Grade |
Mild Steel (Low Carbon Steel, ASTM A234 WPB / IS 1239) |
| Type |
Equal Tee, Reducing Tee, Stub End Tee, Lateral Tee |
| Size Range |
½″ to 48″ (DN15 to DN1200) |
| Standard |
ASME B16.9 / IS 1239 / ASTM A234 |
| Pressure Rating |
SCH 10 / SCH 20 / SCH 40 / SCH 80 / SCH 160 |
| End Connection |
Butt Weld / Socket Weld / Flanged / Threaded |
| Wall Thickness |
As per pipe schedule (SCH 10 – XXS) |
| Outer Diameter (OD) |
21.3 mm – 1219.2 mm |
| Manufacturing Process |
Seamless / Welded / Hot Induction Bending |
| Surface Finish |
Black Painted / Anti-Rust Coated / Galvanized / Pickled & Passivated |
| Testing & Inspection |
Hydrostatic Test / Ultrasonic Test / Radiography / Dimensional Inspection |
| Temperature Range |
–45°C to +400°C (depending on grade) |
| Tensile Strength |
≥ 415 MPa |
| Yield Strength |
≥ 240 MPa |
| Elongation |
≥ 20% |
| Hardness |
≤ 197 HB |
| Tolerance |
As per ASME B16.9 (±1% OD / ±0.03 mm thickness) |
| Applications |
Water Supply, HVAC, Oil & Gas, Chemical Plants, Industrial Piping Systems |
Benefits/Features of Mild Steel Tee
One of the popular Mild Steel Tee Dealers in Kuwait, our all types is made with new and upgraded features inside and gives multiple benefits such as:
-
Durable and Strong: MS Tee is used and this has a long-lasting performance in low-level of pressure systems as well as medium-level pressure systems.
-
Versatile flow distribution: This provides the ability to branch or divide the flow of fluids in pipe systems.
-
Cost-Effective: Mild Steel Tee Beam Economical in comparison to other metal tees and still has good performance.
-
Extensive Selection of varieties: Mild Steel Equal Tee It has a variety in different types available as equal tees or reducing tees depending on the type of piping needed.
-
Easy to install: Mild Steel Fittings has Standardized sizes and welding standards ensure fast and easy installation.
Applications of Mild Steel Tee
As popular Mild Steel Tee Traders in Kuwait, our all types are used in various types of industrial sectors such as:
-
Water Supply Systems: These are used to feed water pipelines in municipal and industrial water distribution systems.
-
Chemical Industry: Mild Steel Socketweld Tee It is used in low- to medium-pressure non-corrosive fluid chemical pipeline transportation.
-
Petrochemical Plants: MS Tee Sections Joins pipelines of oil, gas and petroleum products of secondary or low pressure lines.
-
Construction Projects: Mild Steel Lateral Tee These are used in the plumbing of buildings in water, drains, and fire prevention lines.
Why choose us?
Kolkata Pipe Fittings is a trusted of high-quality Mild Steel Tee Stockists in Kuwait. Here’s why we stand out:
-
Tremendous Quality Materials: Stainless Steel Threaded Tee offer high quality mild steel tees made of high-quality low carbon steel.
-
Diverse Product Line: Equal tees and reducing tees will be offered in accordance with various piping needs.
-
Durability and Reliability: Mild Steel Tube Fittings Designed to perform in low to medium-pressure applications.
-
Precision Engineering: Steel Pipe Tee - Produced to the right size and with a narrow margin of error to fit perfectly.
Kolkata Pipe Fittings is an Excellent Mild Steel Tee Manufacturers, Suppliers, Dealers, Stockists and Traders in Kuwait. Mild steel tees are required tooling of piping which allow an effective branching and flow distribution in low and medium pressure systems. Mild Steel Forged Tee They are manufactured using low-carbon steel that is durable and produced to standards such as ASME B16.9, IS 1239 and ASTM A234 making them reliable in their use, accuracy in terms of dimensional accuracy and long life. The decisions of our mild steel tees give us high quality materials, engineering precision, customization, time delivery, and technical support expertise thus making us a reliable partner in the piping solutions in supply of water, HVAC, chemical, petrochemical, and industrial.
