Features Of Mild Steel Short Bend /MS Short Bend
- Material: It is constructed from mild steel which is reasonably priced and simple to shape.
- Bend Angle: A right-angle turn in the direction of the pipe is possible with a standard bend angle of 90 degrees.
- Radius: Compared to large radius bends, MS short bends have a sharper curvature due to their short radius. This makes it possible for piping layouts to be more compact, but it may also result in a higher flow pressure drop.
- Size: Comes in multiple sizes to fit different pipe diameters.
- Reasonably priced and easily located: For low-pressure applications, MS short bends are an affordable choice because of their common material and simple construction.
Specifications of Mild Steel Short Bend /MS Short Bend
- Pressure Rating: HVAC systems, conduit, plumbing, and other low-pressure applications are common uses for MS short bends. The thickness of the bend wall, which should be selected based on the application, will impact the pressure rating varying pipe sizes and wall thicknesses have varying pressure ratings, as specified by standards such as ANSI B16.1 and B36.10.
- Welding: Typically done in conjunction with pipes using butt or socket welding techniques. Socket welding involves inserting the pipe end into a recessed socket in the fitting and welding around the circumference, however, butt welding is rounding off the pipe ends and welding them directly to the fitting.
- Radius: The centerline radius (CLR) of an MS short bend is usually 1.0 to 1.5 times the pipe diameter, showing that the bend has a short radius. Compared to lengthy radius bends, this narrow curvature can result in a greater pressure drop in the flow but also allows compact piping configurations.
- Finish: MS short bends are usually available in black or galvanized coatings. When it comes to resistance to corrosion, galvanized bends are superior to black bends.
- Availability: As MS short bends are made of a common material and have an easy-to-find design, they are an affordable choice for low-pressure applications.
Applications of Mild Steel Short Bend /MS Short Bend
The applications of Mild Steel Short Bends (MS Short Bends) concentrate mainly on low-pressure systems due to their material properties and bend design. We as a most significant Carbon Steel Elbow, CS Elbow Dealers, Stockist, Traders in Pune, Maharashtra supply products to various industries for various applications. Here are a few important areas of use:
- Plumbing: To reposition the pipes in sinks, toilets, and other fixtures, low-pressure plumbing systems frequently use Mild Steel Short Bends. Because mild steel can withstand moderate temperatures, it can be used for both hot and cold water lines.
- HVAC Systems: MS short bends are used to direct airflow in ductwork in heating, ventilation, and air conditioning systems. While their small size makes optimal use of available space, if airflow velocity is great, there might be a pressure drop.
- Conduit Systems: Mild Steel Short Bends serve a purpose in electrical conduit systems to reposition cables and wires. Due to their pressure limitations, they are suitable for low-voltage applications.
- Furniture and Shelving: Mild Steel Short Bends are suitable in non-structural applications such as furniture frames and shelf structures. Due to their formability, unusual bends and angles can be created.
- Railings and Fencing: MS short bends can be used occasionally in non-critical support structures for railings or fences, especially for temporary installations. However, stronger steel choices would be chosen for high-stress applications.
We as Kolkata Pipe Fittings are leading Mild Steel Short Bends, Short Bends Manufacturers, Suppliers, Dealers, Stockist, Traders in Pune, Maharashtra. MS short bends are low-pressure pipe fittings that create a 90-degree turn for conduit systems, HVAC, and plumbing. They are made of reasonably priced mild steel. Although their small size makes the design more space-efficient, it can cause a fluid's pressure loss to increase. These welded fittings are readily available in a range of diameters and have a black or galvanized finish. Because of their formability, they are ideal for non-critical bends in furniture or railings, however, high-stress applications are better served by stronger steel. Contact us for a free consultation and we will recommend you the best possible Mild Steel Short Bends, Short Bends solution to your needs.
